Table of Contents
Advertisement
System Configuration
System Configuration
System Information
• System Name: The system name of the DSA-5100. Used for SNMP purposes. The default is DSA-5100.
• Administrator Info: Information on how to contact the system administrator can be entered here. The administrator's
name, phone number, and e-mail address can be entered here. If a user connects to the DSA-5100 and WAN1 has a
connection problem, the user logon screen will show the system administrator information that was entered here.
• Succeed Page: Enter a URL to direct users to once they have been authenticated. Typically this would be a company
web page such as www.dlink.com.
• Remote Management IP: When enabled, the IP address entered has the ability to manage the DSA-5100 via the
WAN1 interface. This allows the system at the specified IP address to manage the DSA-5100 over the Internet.
• Access History IP: The IP address of your billing system should be entered here to allow the billing system to access
the DSA-5100's billing history information.
• SNMP: The DSA-5100 supports SNMP v2 read only data access. The administrator can specify the IP address and the
SNMP community name to determine the target of the management information base (MIB) exported from the DSA-5100.
• User Logon SSL: When enabled, the user logon is secure using https. If disabled, standard http is used.
• Time: The DSA-5100 supports NTP Time Server configuration for accurately synchronizing the network time. If NTP is
enabled, you can enter an NTP server for time synchronization. The alternate option is Set Device Date and Time, which
allows you to manually specify the time.
9
DSA-5100 Installation Guide
Advertisement
Table of Contents
