Configuring on Windows 98SE/Me Platforms (continued)
Click
on the Details tab
Choose the "D-Link LPT Port (Print Server)" from the
list attached at the Print To the following port. Be
sure that the Printer Driver item is configured to the
correct driver of your printer.
Click
Port Settings
Type in the IP address of the DI-704UP.
Click
OK
Configuring on Windows 2000/XP Platforms
Click
Port
The configuration procedure for a Windows
2000/XP platform is similar to that of Windows
95/98 except the screen of printer Properties:
Click
Configure Port
Type in the IP address of the DI-704UP.
Click
OK
(Note: Screen shots are taken in Windows 2000,
similar screens will appear in Windows XP.)
11