Configuring On Windows 2000/Xp Platforms - D-Link DI-704P Quick Installation Manual

Configuring on Windows 98se/Me Platforms (continued)
Click on the
Details tab
Choose the "PRTmate: (All-in-1)" from the list
attached at the Print To item. Be sure that the
Printer Driver item is configured to the correct driver
of your printer.
Click Port Settings
Type in the IP address of the DI-704P.
Click OK

Configuring on Windows 2000/XP Platforms

Click Port
The configuration procedure for a Windows
2000/XP platform is similar to that of Windows
95/98 except the screen of printer Properties:
Click Configure Port
Type in the IP address of the DI-704P.
Click OK
(Note: Screen shots are taken in Windows 2000,
similar screens will appear in Windows XP.)
11