Restart Your Computer - D-Link DI-707P Quick Installation Manual

Restart Your Computer

Connecting Additional Computers To
The DI-707P
Using additional Ethernet (CAT5 UTP) cables, connect your
Ethernet-equipped computers to the remaining Ethernet LAN ports
on the back panel of the DI-707P
M1 LED – will flash
consistently to indicate
that the DI-707P is
working properly.
POWER LED – a solid
light indicates a proper
connection to the
power supply.
M2 LED – a solid light indicates
that Internet connection has
been established.
LOCAL NETWORK
LEDs – a solid light
on the port indicates a
connection to an
Ethernet enabled
computer on ports 1-7.
This LED blinks during
data transmission.
WAN LED – a
solid light indicates
connection on the
WAN port. This
LED blinks during
data transmission.