TP-Link TL-WR940N User Manual page 45

450mbps wireless n router
Hide thumbs Also See for TL-WR940N:
Table of Contents

Advertisement

Chapter 4
Ignore Ping Packet From WAN Port
ping packet from the Internet cannot access the router.
Forbid Ping Packet From LAN Port
ping packet from LAN cannot access the router. This function can be used to defend
against some viruses.
3. Click Save.
4. Click
Blocked DoS Host List
4. 7. 3.
Local Management
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to
Security
>
accessing the router.
For
example, if you want to allow PCs with specific MAC addresses to access the router's
web management page locally from inside the network, please follow the instructions
below:
1 ) Select
Only the PCs listed can browse the built-in web pages to perform
Administrator
2 ) Enter the MAC address of each PC separately. The format of the MAC address
is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). Only the PCs with the listed
MAC addresses can use the password to browse the built-in web pages to
perform administrator tasks.
3 ) Click Add, and your PC's MAC address will also be listed.
4 ) Click Save.
- The default setting is disabled. If enabled, the
- The default setting is disabled. If enabled, the
to display the DoS host table by blocking.
Local
Management, and you can block computers in LAN from
tasks.
Configure
43

Advertisement

Table of Contents
loading

Table of Contents