Table of Contents
Advertisement
Available languages
Available languages
Electrical Installation
Electrical requirements
You can find the identification plate with the electrical
specifications on the underside of the appliance. The
junction box must be located within 3 feet of the cooktop
connection. It should be easily accessible for service
purposes.
Power supply
Connect Electrical Supply
CAUTION
9
Before installing, turn off power supply at the service
panel. Lock service panel to prevent power from
being turned on accidentally.
Refer to rating label for more information. See "Customer
Service" for rating label location.
The maximum current rating of the branch-circuit
breaker, the wire sizes and the connections must
conform to the requirements of the National Electrical
Code or Canadian Electrical Code and all local codes
and ordinances.
Attach flexible conduit to the junction box. Connect the
lead wires to the junction box supply wires in proper
phase:
black (L1) to black
▯
red (L2) to red
▯
green or bare to ground
▯
1
House power supply cord
2
Black wire
3
Junction box
4
Cooktop power supply cord
5
Grounded green or bare cable
6
Certified UL connector
7
Red wire
If the cooktop is installed and connected as specified
above, it will be grounded in compliance with the
National Electrical Code.
Check the Installation
Remove everything from the cooktop surface including
stickers. Clean cooktop surface with cooktop cleaning
cream.
Switch on the circuit breaker.
Verify that elements function properly.
7
Advertisement
Chapters
Table of Contents
