Getting Started; Startup Wizard - Samsung Wisenet SNK-B73040BW Quick Start Manual

Getting Started


(1) Install the cameras on the walls and connect the power adapters to each camera.
(2) Plug in the NVR power adapter and connect the NVR to your Wi-Fi router.
(3) When the NVR is powered on, it will automatically start the pairing process with the cameras. Once the process is complete, the
NVR will display live video feeds from your cameras and then start recording.
(4) You will briefly see a live video on display before you start the Startup Wizard.
(5) To configure advanced settings for device, please follow the Startup Wizard instructions to complete installation as shown below.

Startup Wizard

After NVR startup is completed, the startup wizard will be displayed.
Wizard setting menu includes:
• Homepage
• Admin password setting
• Hard drive management
• Video recording schedule
• Basic system configuration
• Network setup
• E-mail setting
• DDNS setting
You can click on "Don't show this window next time" if you do not want the setting wizard to start automatically next time.
1.
Set Admin Password
Please create a username and password for your NVR. Password
MUST be 8~13 characters long. When password is 8~9 characters
long, it should be with at least a combination of letters, digits and special
symbols. If it is 10~13 characters long, it should be with at least a com-
bination of two types of characters. 4 or more contiguous or repeated
characters or key arrangement are prohibited, for example 1111, 1234,
abcd, qwerty.
2_ English
CAUTION
RISK OF ELECTRI SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRICAL SHOCK
DO NOT OPEN COVERS. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
WARNING : TO PREVENT FIRE OR SHOCK HAZARD. DO NOT
EXPOSE UNITS NOT SPECIFICALLY DESIGNED
FOR OUTDOOR USE TO RAIN OR MOISTURE.
WAN
VGA

HDMI
12V