Electrolux GA60GLVS User Manual page 12

12 www.electrolux.com
6.6 How to set the colour of the
TimeBeam
It is possible to change the colour of the
TimeBeam to match the colour of the
kitchen floor. There are several colours
available. The TimeBeam can also be
deactivated.
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
the indicators
and
blank.
2. Press
• The indicators
• The indicator
flash.
• The display shows a number and
the letter C. Each number refers to
a different colour.
–
3. Press
the colour.
• You can see the different colours
on the kitchen floor.
4. Press the on/off button to confirm the
setting.
6.7 AirDry
AirDry improves the drying results with
less energy consumption.
and
, , ,
start to flash and the display is
.
, ,
go off.
continues to
= TimeBeam deactivated.
again and again to change
until
AirDry is automatically activated with all
programmes excluding Vorspülen.
,
To improve the drying performance refer
to the XtraDry option or activate AirDry.
How to deactivate AirDry
, and
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
the indicators
and
blank.
2. Press
• The indicators
• The indicator
• The display shows the current
3. Press
= AirDry deactivated.
4. Press the on/off button to confirm the
setting.
6.8 MyFavourite
With this option you can set and save the
programme that you use more frequently.
You can only save 1 programme. A new
setting cancels the previous one.
How to save the MyFavourite
programme
1. Set the programme that you want to
save
While the drying phase
operates, a device opens the
appliance door. The door is
then kept ajar.
CAUTION!
Do not try to close the
appliance door within 2
minutes after automatic open.
This can cause damage to
the appliance.
, ,
start to flash and the display is
.
,
go off.
continues to
flash.
setting: = AirDry activated.
to change the setting:
and until
, ,
, , and