Table of Contents
Advertisement
Available languages
Available languages
2. Press
.
• The indicators
go off.
• The indicator
flash.
• The display shows the current
setting: e.g.
– The levels of rinse aid are from
0A to 6A.
– Level 0 = no rinse aid is
released.
3. Press
again and again to change
the setting.
4. Press the on/off button to confirm the
setting.
6.4 The rinse aid empty
notification
The rinse aid helps to dry the dishes
without streaks and stains.
The rinse aid is automatically released
during the hot rinse phase.
When rinse aid chamber is empty, the
rinse aid indicator is turned on notifying to
refill rinse aid. If you are using multi-tabs
containing rinse aid and you are satisfied
with the drying result, you can deactivate
the notification for refilling rinse aid.
However, we recommend that you always
use rinse aid for best drying performance.
If you use standard detergent or multi-
tablets without rinse aid, activate the
notification to keep the rinse aid refill
indicator active.
How to deactivate the rinse aid
empty notification
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
the indicators
and
start to flash and the display is
blank.
2. Press
.
,
,
,
and
continues to
= level 4.
and
until
,
,
,
,
• The indicators
go off.
• The indicator
flash.
• The display shows the current
setting:
notification is activated (factory
setting).
3. Press
to change the setting.
= the rinse aid empty notification is
deactivated.
4. Press the on/off button to confirm the
setting.
6.5 Acoustic signals
Acoustic signals sound when a
malfunction of the appliance occurs. It is
not possible to deactivate these acoustic
signals.
There is also an acoustic signal that
sounds when the programme is
completed. By default this acoustic signal
is deactivated but it is possible to activate
it.
How to activate the acoustic
signal for the end of programme
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
the indicators
and
start to flash and the display is
blank.
2. Press
• The indicators
go off.
• The indicator
flash.
• The display shows the current
setting:
3. Press
to change the setting.
= Acoustic signal on.
4. Press the on/off button to confirm the
setting.
ENGLISH
,
,
,
and
continues to
= the rinse aid empty
and
until
,
,
,
,
,
,
,
and
continues to
= Acoustic signal off.
11
Advertisement
Chapters
Table of Contents
