KAM Cluster FX-Bar Instruction Manual

KAM Cluster FX-Bar Instruction Manual

Portable performance lighting & laser rig

Advertisement

Quick Links

Kam Cluster FX-Bar
Portable performance lighting & laser rig
M
A
N
U
A
L
V
E
R
S
I
O
N
1
.
0
1 2 - 1 6
For the latest instruction manual updates and information on the entire Kam range visit:
www.kam.co.uk
Kam products are manufactured by: Lamba plc, Unit 1, Southfields Road, Dunstable, Bedfordshire, United Kingdom LU6 3EJ
Telephone: (+44) (0)1582 690600 • Fax: (+44) (0)1582 690400 • Email: mail@lambaplc.com • Web: www.lambaplc.com
If this product is ever no longer functional please take it to a recycling plant for environmentally friendly disposal.
Due to continuous product development, specifications and appearance are subject to change.
© Copyright Lamba plc. E&OE.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Cluster FX-Bar and is the answer not in the manual?

Questions and answers

Summary of Contents for KAM Cluster FX-Bar

  • Page 1 For the latest instruction manual updates and information on the entire Kam range visit: www.kam.co.uk Kam products are manufactured by: Lamba plc, Unit 1, Southfields Road, Dunstable, Bedfordshire, United Kingdom LU6 3EJ Telephone: (+44) (0)1582 690600 • Fax: (+44) (0)1582 690400 • Email: mail@lambaplc.com • Web: www.lambaplc.com If this product is ever no longer functional please take it to a recycling plant for environmentally friendly disposal.
  • Page 2 Thank you for purchasing this Kam product, we are sure that it will serve you for many years to come. To optimise it’s performance, please read these instructions carefully to familiarise yourself with the basic operations of the unit. Please retain them for future reference.This unit has been tested at the factory before being shipped to you. To prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or moisture.
  • Page 3 Laser safety warnings… Potential laser injury hazard exists with this product! Please read these instructions carefully, which include important information about installation, safe use and service! Caution Avoid direct eye contact with laser light. Never intentionally expose your eyes or others to direct laser radiation. Caution It is illegal and dangerous to shine any laser at aircraft.
  • Page 4 Unit features & functions Number Feature Function Power supply input Attach the IEC mains cable here. Built-in fuse. DMX input 3 pin XLR connector for DMX512 input communication. DMX output 3 pin XLR connector for DMX512 output communication. LED display LED function display and menu buttons to control the operating mode of the unit.
  • Page 5 DMX address setting When controlling the unit (or units) with a DMX controller, each one must be set with a specific DMX address. You can choose to set all units with the same DMX address or you can set every unit with its own DMX address. If all units are set with the same DMX address all units will be synchronised and operate in the same way.
  • Page 6 11 channel DMX mode Channel Value 0-255 0-255 Green Laser 0-255 Motor 0-255 0-255 Green Par cans 0-255 Blue 0-255 White 0-255 0-255 Green Laser 0-255 Motor 0-255 Strobe Remote control operation ON/OFF button – turn the unit on or off DMX button –...

Table of Contents