Bottom Cover - HP 14-BS0 Series Maintenance And Service Manual

Bottom cover

Description
Bottom cover for use in models with an optical drive:
● Pike/natural silver
● Silk gold
● Smoke gray
● Marine blue
● Snow white
Empress red
●
● Jack black
Bottom cover for use in models without an optical drive:
● Pike/natural silver
● Silk gold
Smoke gray
●
● Marine blue
● Jack black
● Snow white
● Empress red
Before removing the bottom cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the optical drive (see
To remove the bottom cover:
1. Remove the 2 Phillips PM2.5×5.0 screws (1) that secure the bottom cover to the computer.
Battery on page 32).
Optical drive on page 34), if installed.
Component replacement procedures
Spare part number
925326-001
925327-001
925324-001
925325-001
925323-001
925657-001
925322-001
925332-001
925333-001
925330-001
925331-001
925328-001
925329-001
925334-001
41