Optical Drive - HP 14-BS0 Series Maintenance And Service Manual

Optical drive

Description
DVD+/-RW Double-Layer SuperMulti Drive
Optical drive bracket
Optical drive bezel
Snow white
Smoke gray
Marine blue
Pike/natural silver
Silk gold
Empress red
Jack black
Before removing the optical drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
To remove the optical drive:
1. Remove the Phillips PM2.5×6.0 screw (1) that secures the optical drive to the computer.
2. Remove the optical drive (2) by sliding it out of the optical drive bay.
34 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
Battery on page 32).
Spare part number
920417-001
925353-001
925337-001
925338-001
925339-001
925340-001
925341-001
925658-001
925336-001