Kenwood DNX8170DABS Instruction Manual page 60

Other External Components
R-CAM Settings (
If you select [CMOS 3-Series Camera] for
[Rear Camera], adjusts the CMOS-3xx series
with ID 1 set. For details, see the instruction
manual of your camera.
Parking Guidelines
You can display parking guidelines to enable
easier parking when you shift the gear to the
reverse (R) position.
Default is "ON".
Guidelines SETUP
If you select [ON] for [Parking Guidelines],
adjust the parking guidelines. See To adjust
the parking guidelines (P.60).
Dashboard Camera /Front Camera
(
Dashboard Camera: Select this when the
dashboard camera is connected.
CMOS 3-Series Camera: Select this when
the CMOS-3xx series with ID 2 set is
connected.
Other: Select this when the other camera is
connected.
OFF (Default): Select this when no camera is
connected.
F-CAM Settings (
If you select [CMOS 3-Series Camera] for
[Dashboard Camera /Front Camera],
adjusts the CMOS-3xx series with ID 2 set. For
details, see the instruction manual of your
camera.
Front Camera Mirror Image
(
If you select [ON] for [Dashboard Camera /
Front Camera].
ON: Displays the picture from the front view
camera horizontally reversed.
OFF (Default): Displays the picture from the
front view camera as it is.
Dashboard Camera (
ON: Select this when the dashboard camera
is connected.
OFF (Default): Select this when no camera is
connected.
60
)
)
)
)
)
To adjust the parking guidelines
NOTE
• Install the rear view camera in the appropriate
position according to the instructions supplied
with the rear view camera.
• When adjusting the parking guidelines, make
sure to use the parking brake to prevent the car
from moving.
1
Touch [ON] of [Parking Guidelines] in the
Camera screen. (P.59)
2
Touch [Guidelines SETUP] in the Camera
screen.
3
Adjust the parking guidelines by
selecting the mark.
4
Adjusting the position of the selected
mark.
C
Make sure that A and B are horizontally
parallel, and that C and D are the same
length.
NOTE
• Touch [Initialize] and after touch [Yes] to set all
the marks to the initial default position.
A
D
B