Controlling General Audio; Equalizer Control - Kenwood DNX8170DABS Instruction Manual

5
Select the crossover network mode.
A confirmation screen appears.
6
Touch [Yes].
NOTE
• When the 3-way speaker system is selected, the
following functions are disabled.
– Zone Control
– Fader of Controlling General Audio
– Front focus of Listening Position/ DTA
– Select the speakers to output the sound from
cell-phone of Blutooth HF/Audio
– Beep of User Interface Setup
• Connecting 3-way speakers with the 2-way mode
selected can break the speakers.

Controlling General Audio

1
Press the [MENU] button.
Popup menu appears.
2
Touch [Audio].
Audio screen appears.
3
Touch [Fader / Balance].
4
Set each item as follows.
Fader / Balance
Adjust the volume balance around the
touched area.
[C] and [D] adjust the right and left volume
balance.
[R] and [S] adjust the front and rear volume
balance.
[Center]
Clear the adjustment.

Equalizer Control

You can adjust equalizer by selecting the
optimized setting for each category.
1
Press the [MENU] button.
Popup menu appears.
2
Touch [Audio].
Audio screen appears.
3
Touch [Equalizer].
4
Touch the screen and set the Graphic
Equalizer as desired.
Gain level (dotted frame area)
Adjust the gain level by touching the each
frequency bar.
You can select frequency bar and adjust its
level by [R], [S].
Preset Select
Displays the screen to recall the preset
equalizer curve.
Memory
Saves the adjusted equalizer curve from
"User1" to "User4".
Controlling Audio
71
English