Adjusting The Volume; Monitor Angle Control - Kenwood DNX8170DABS Instruction Manual

Basic Operations
Calendar/clock settings
1
Press the [MENU] button.
Popup menu appears.
2
Touch [SETUP].
SETUP Menu screen appears.
3
Touch [User Interface].
User Interface screen appears.
4
Set each item as follows.
Scroll the page to show the item.
Clock
NAV-SYNC (Default): Synchronizes the clock
time with navigation.
Manual: Sets the clock manually.
Time Zone
If you have selected [Manual] for Clock,
select the time zone.
Clock Adjust
If you select [Manual] for Clock, adjust the
date and time manually. (P.64)
12

Adjusting the volume

To adjust the volume (0 to 40),
Press [R] to increase, and press [S] to decrease.
Holding [R] increases the volume continuously
to level 15.
Turn to the right to increase, and turn to the
left to decrease.

Monitor Angle Control

( )
You can adjust the position of the monitor.
1
Press the [G] button.
Angle Adjust screen appears.
2
Select a below number that represents
your desired angle setting.
Default is "0".
Off Position
You can store the current monitor angle as
the angle during power off. Touch [Memory]
when the desired angle is selected.
Auto Open (
The front panel can be set to open
automatically when the ignition is turned
off, so that it can be detached for antitheft
purpose.
)