Serial Communication Interface (Sci) - Mindeo FS390 User Manual

8 Serial Communication Interface (SCI)

Note: The SCI programming commands can be used in place of the programming barcodes.
All communication between the scanner and host occurs over the hardware interface lines using the
Serial Communication Interface (SCI). The function of the SCI show as below:
Maintain a bi-directional communication interface between the scanner and the host.
Allow the host to send commands to access the settings of the scanner.
Passes decoded data from the scanner to the host.
In this section, the programming and query command syntax is described and examples of using
commands to access the scanner are presented.
103