Configuring Email Server Settings - Epson WF-3720 Series User Manual

Network Environment Messages
Message
The same SSID may be set on several
access points.
The Wi-Fi environment needs to be
improved. Turn the wireless router off and
then turn it on. If the connection does not
improve, see the documentation for the
wireless router.
*No more devices can be connected.
Disconnect one of the connected devices if
you want to add another one.
Parent topic:

Configuring Email Server Settings

To use features such as scanning to email or forwarding faxes to email, you need to configure the email
server. You can select settings for the email server using the control panel on the product.
1. Press the
2. Select Settings.
3. Select General Settings.
Printing a Network Connection Report
home button, if necessary.
Solution
Check the settings on your router and other access points
to make sure each one uses a different SSID.
Move your product closer to your router or access point,
and remove any obstacles between them. Then turn off
your router or access point, wait about 10 seconds, and
turn it back on again. If you still cannot connect to your
product, check the documentation that came with your
router or access point for solutions.
You can connect up to four computers or other devices to
your product using a Wi-Fi Direct (Simple AP) connection.
If you want to add another device, disconnect an existing
connected device first.
60