11.
INSTALLATION
11.1 Unpacking
CAUTION!
All transit bolts and packing must be
removed before using the appliance.
You are advised to keep all transit
devices so that they can be refitted if
the machine ever has to be
transported again.
1.
Use gloves. Remove the external film.
If necessary, use a cutter.
2. Remove the cardboard top.
3.
Remove the polystyrene packaging
materials.
4.
Remove the plastic bag which cover
the machine.
Open the door. Remove the polysty-
5.
rene piece from the door seal and all
the items from the drum.
Put one of the polystyrene packaging
6.
elements on the floor behind the
appliance. Carefully put down the
appliance with the rear side on it.
Make sure not to damage the hoses.
7. Remove the polystyrene base.
Pull up the appliance in vertical
8.
position.
9. Remove the power supply cable and
the drain and inlet hoses from the
hose holders (A) on the rear of the
appliance.
29
1
2