Table of Contents
Advertisement
6
Edit the text memo if necessary (30
characters max.). a MOKN
7
MbN: Select the desired alarm tone. a
MSelectN 2 times a MOFFN
Erasing an entry
Schedule alarm entries are not erased
automatically after the schedule alarm sounds.
Erase unwanted entries.
1
MMenuN (right soft key) a
MSelectN
2
MListN a MbN: Select the desired entry.
3
MMenuN a MbN: "Erase" a MSelectN
4
MbN: "Yes" a MSelectN a MOFFN
Erasing all entries
1
MMenuN (right soft key) a
MSelectN
2
MListN a MMenuN
3
MbN: "Erase all" a MSelectN
4
MbN: "Yes" a MSelectN
5
MbN: "Yes" a MSelectN a MOFFN
Registering a unit
Operating additional units
Additional handsets
Up to 6 handsets can be registered to the
base unit.
Important:
R The additional handset model
recommended for use with this unit is noted
on page 4. If another handset model is
used, certain operations may not be
available.
Registering a handset to the
base unit
The supplied handset and base unit are
pre-registered. If for some reason the handset
PRS120C(en)_0121_ver110.pdf
is not registered to the base unit (for example,
near the base unit), re-register the handset.
1
2
a
3
Deregistering a handset
A handset can cancel its own registration to
the base unit, or other handsets registered to
the same base unit. This allows the handset to
a
end its wireless connection with the system.
1
2
3
4
31
Programming
is displayed even when the handset is
Handset:
MMenuN (right soft key) #130
Base unit:
Press and hold M
N for about 5 seconds.
R If all registered handsets start ringing,
press M
N again to stop, then repeat
this step.
Handset:
Press MOKN, then wait until a long beep
sounds.
MMenuN (right soft key) #131
R All handsets registered to the base unit
are displayed.
MbN: Select the handset you want to
cancel. a MSelectN
MbN: "Yes" a MSelectN
MOFFN
31
2014/01/29
14:56:58
Advertisement
Table of Contents
