Registering A Unit - Panasonic KX-TGW420 Operating Instructions Manual

Getting Started
6
Press MBackN or MHomeN repeatedly to return
to standby mode.
Line selection mode
The line selection mode determines which line is
selected when:
– you lift the corded handset
– you press M N (when making/answering calls)
The following setting is available:
– "Auto" (default): When making a call, the
available line is selected automatically.
– "Line1" to "Line4": Corresponding line is
selected first. If that line is unavailable, the next
available line is selected.
1
MMenuN
2
MbN: "Line Settings" a MSelectN
3
MbN: "Priority Line" a MSelectN
4
MbN: Select the desired setting. a MSelectN
5
Press MBackN or MHomeN repeatedly to return
to standby mode.
Note:
R You can select a line manually regardless of the
line selection mode by pressing corresponding
line key (MLINE 1N to MLINE 4N).

Registering a unit

Operating additional units
Additional units
Up to 9 desk phones and cordless handset can be
registered to the base unit.
Important:
R See page 3 for information on the available
model.
Registering a unit to the base unit
If for some reason the handset is not registered to
the base unit, re-register the unit.
1
Base unit:
MMenuN
2
MbN: "Add/Remove Phones" a MSelectN
3
MbN: "Register Phone" a MSelectN
12 For assistance, please visit http://shop.panasonic.com/support
TGW420_(en)_OI_1226_ver06.pdf 12
4
KX-TGWA40/KX-TGWA41:
Press MRegN, then wait until a long beep
sounds.
Deregistering a unit
A unit can cancel its own registration to the base
unit, or other units registered to the same base
unit. This allows the unit to end its wireless
connection with the system.
1
Base unit:
MMenuN
2
MbN: "Add/Remove Phones" a MSelectN
3
MbN: "Deregister Phone" a MSelectN
4
MbN: Select the desired unit. a MSelectN a
MYesN
2019/12/26 13:15:32