Table of Contents
Advertisement
*1 If you program these settings using one of the units, you do not need to program the same item using
another unit.
*2 This menu is not displayed when scrolling through the display menus. It is only available in direct
command code.
*3 This feature allows the unit to automatically adjust the date and time each time caller information
including date and time is received.
To turn this feature on, select "Caller ID". To turn this feature off, select "Manual". (Caller ID
subscribers only)
To use this feature, set the date and time first (page 15).
*4 The preset melodies in this product ("Ringtone 3" - "Ringtone 40") are used with permission of
© 2012 Copyrights Vision Inc.
*5 If you do not want the unit to ring before the caller information is received, set to "Off". (Caller ID
subscribers only)
You can only remove the first ring if the unit rings 2 times or more by default, which depends on your
phone service provider.
*6 This setting is available when you have the key finder (KX-TGA20EX). Read the installation manual
for more information on the key finder.
*7 For models with supplied key finders, the display shows "1:Finder1".
*8 If you register 2 or more key finders.
*9 This menu is not displayed when repeater mode is set to "On".
*10 If you subscribe to a Caller ID service and want to view the caller's information after lifting up the
handset to answer a call, turn off this feature.
*11 The recall/flash time depends on your telephone exchange or host PBX. Contact your PBX supplier if
necessary.
*12 To prevent other users from joining your conversations with outside callers, turn this feature on.
*13 Handset only
*14 This menu icon is displayed when the key finder is not registered.
*15 Base unit only
Alarm
An alarm sounds at the set time for 1 minute and
is repeated 5 times at 5 minute intervals (snooze
function). A text memo can also be displayed for
the alarm. A total of 3 separate alarm times can be
programmed for each handset. You can set one of
3 different alarm options (once, daily, or weekly)
for each alarm time.
Important:
R Make sure the unit's date and time setting is
correct (page 15).
Handset
1
MMENUN#720
2
MbN: Select the desired alarm. a MOKN
3
MbN: Select the desired alarm option. a MOKN
Off
Turns alarm off. Go to step 9.
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
TGF320E(en)_0123_ver020.pdf
33
Once
An alarm sounds once at the set
time.
Daily
An alarm sounds daily at the set
time. Go to step 5.
Weekly
Alarm sounds weekly at the set
time(s).
4
Proceed with the operation according to your
selection in step 3.
n Once:
Enter the desired date and month. a MOKN
n Weekly:
MbN: Select the desired day of the week and
press MSELECTN. a MOKN
5
Set the desired time. a MOKN
6
Enter a text memo (10 characters max.). a
MOKN
Programming
33
2015/01/23
18:26:30
Advertisement
Table of Contents
