Table of Contents
Advertisement
Parameters and values
Several of the System Control Center screens list status and operational parameters
and their current values in a tabular format. For example, the following illustration
shows the Reception Information page. The left column list the parameters, and the
right column shows the current value of the parameter listed in the left column.
Parameters are listed in this format on these screens:
• System Status page
• Reception Information page
• Transmission Information page
On any of these screens, if a parameter name or the current value of a parameter is
underlined, you can click the name or value to see an explanation of it.
Figure 8: Format of status and information screens
Refer to the sections below for an explanation of the parameters unique to each
screen.
• System Status page on page 18
• Reception Information page on page 19
• Transmission Information page on page 21
• System Information page on page 22
Red flag indicator
On the status and information screens, a red flag next to a value indicates a problem
related to the parameter listed in the same row where the flagged value appears. The
flagged value appears in the right column; the parameter appears in the left column.
The value indicates the current state of the parameter. If you see a red flag, you can
click the underlined parameter value in the right column to see additional
information about the problem.
Chapter 2 • System Control Center
1039708-0001 Revision A
17
Advertisement
Table of Contents
