Ipsec Icon - Hughes HN9800 User Manual

Hide thumbs Also See for HN9800:
Table of Contents

Advertisement

detailed status information, click the System Status button to open the System Status
page.
Button color
Green
Red
Yellow
Orange
If the System Status button is red
value or values on the System Control Center information pages (those with tables
listing parameters and values). The red flag indicates a problem related to the
parameter listed next to the flagged value. If the parameter name is underlined, click
the parameter name to see a message that may include helpful information,
depending on what the problem is.

IPSec icon

An icon that looks like a small lock next to the System Status button means IPSec is
enabled. This icon is shown in Figure 6.
IPSec (Internet Protocol Security) is a set of network protocols and services that
provide security to IP networks by authenticating and encrypting each IP packet of a
data stream. IPSec-protected packets travel through a virtual tunnel or path between
Table 2: Status button colors
The satellite modem is operating normally. (OK
appears beneath the
page 14.)
A problem has been detected.
Performance is temporarily impaired because:
• There may be a problem with Web Acceleration.
• The modem may be temporarily using a backup
configuration.
• There may be virus activity.
Degraded – The modem is fully operational, but
performance is temporarily impaired because the
daily download allowance has been exceeded.
or yellow
Figure 6: IPSec icon
Meaning
System Status button
, look for a red flag next to any
Chapter 2 • System Control Center
1039708-0001 Revision A
on
15

Advertisement

Table of Contents
loading

Table of Contents