Specifications - Stihl MS 460 Instruction Manual

Specifications

Engine
STIHL single cylinder two-stroke engine
Displacement: 76.5 cc
Bore: 52 mm
Stroke: 36 mm
Engine power to 4.4 kW (6 bhp) at
ISO 7293: 9,500 rpm
Idle speed: 2,500 rpm
Max. permissible
speed (with cutting
attachment): 13,500 rpm
Ignition System
Electronic magneto ignition
Spark plug (resistor Bosch WSR 6 F,
type): NGK BPMR 7 A
Electrode gap: 0.5 mm
Fuel System
All position diaphragm carburetor with
integral fuel pump
Fuel tank capacity: 800 cc (0.8 l)
Chain Lubrication
Fully automatic, speed-controlled
reciprocating oil pump. Additional
manual oil flow control
Oil tank capacity: 325 cc (0.325 l)
MS 460
Weight
dry, without bar and chain
MS 460:
MS 460 with handle heating:
MS 460 with handle and carbu-
retor heating:
MS 460 Rescue saw:
Cutting Attachment
Actual cutting length may be less than
the specified length
Rollomatic guide bars
Cutting lengths: 37, 40, 45, 50, 63,
75 cm
Pitch: 3/8"
Groove width: 1.6 mm
3/8" chains
Rapid Micro (36 RM) Type 3652
Rapid Super (36 RS) Type 3621
Rapid Super 3 (36 RS3) Type 3626
Pitch: 3/8" (9.32 mm)
Drive link gauge: 1.6 mm
Chain sprockets
7-tooth for 3/8" (rim sprocket)
8-tooth for 3/8" (ring sprocket)
Noise and Vibration Data
Noise and vibration data measurements
include idling, full load and rated
maximum speed with the same duration
of exposure.
For further details on compliance with
Vibration Directive 2002/44/EC see
www.stihl.com/vib/
Sound pressure level L
6.6 kg
6.7 kg
101 dB(A)
Sound power level L
6.8 kg
7.0 kg
113 dB(A)
Vibration measurement a
ISO 7505
MS 460
MS 460 Rescue
Saw
The K-factor in accordance with
Directive 2006/42/EC is 2.0 dB(A) for
the sound pressure level and sound
power level; the K-factor in accordance
with Directive 2006/42/EC is 2.0 m/s
for the vibration level.
REACH
REACH is an EC regulation and stands
for the Registration, Evaluation,
Authorisation and Restriction of
Chemical substances.
For information on compliance with the
REACH regulation (EC) No. 1907/2006
see www.stihl.com/reach.
Exhaust Emissions
The CO value measured in the EU type
2
approval procedure is specified at
www.stihl.com/co2.
English
to ISO 7182
peq
to ISO 9207
peq
to
hv,eq
Handle, Handle,
left right
2 2
4.2 m/s 6.0 m/s
2 2
3.1 m/s 6.4 m/s
2
47