Makita XRU11 Instruction Manual page 12

► 1. Hex socket head bolt 2. Hanger
Hex wrench storage
CAUTION:
Be careful not to leave the hex
wrench inserted in the tool head. It may cause
injury and/or damage to the tool.
When not in use, store the hex wrench as shown in the
figure to keep it from being lost.
1
► 1. Hex wrench
► 1. Grip 2. Hex wrench
OPERATION
Correct handling of tool
WARNING:
right-hand side. Correct positioning of the tool allows
for maximum control and will reduce the risk of seri-
ous personal injury caused by kickback.
1
WARNING:
2
control of the tool at all times. Do not allow the
tool to be deflected toward you or anyone in the
work vicinity. Failure to keep control of the tool
could result in serious injury to the bystander and the
operator.
WARNING:
than 15m (50 ft) distance between operators when
two or more operators work in one area. Also,
arrange a person to observe the distance between
operators. If someone or an animal enter the
working area, immediately stop the operation.
Attachment of shoulder harness
CAUTION:
attached. Before operation, adjust the shoulder
1
harness according to the user size to prevent
fatigue.
Connect the hook of the shoulder harness to the hanger
and put the shoulder harness on. Make sure that the
tool is held securely by the shoulder harness.
2
► 1. Hook 2. Hanger
12 ENGLISH
Always position the tool on your
Be extremely careful to maintain
To avoid accident, leave more
Always use the shoulder harness
2
1