Related Manuals for Makita XRU09PT
Summary of Contents for Makita XRU09PT
- Page 1 INSTRUCTION MANUAL Cordless Grass Trimmer XRU09 015384 IMPORTANT: Read Before Using.
-
Page 2: Specifications
ENGLISH (Original instructions) SPECIFICATIONS Model XRU09 Type of handle Loop handle No load speed (RPM) 5,000 / 6,500 /min Overall length 1,754 mm (69") Nylon cord diameter 2.0 - 2.3 mm (0.08" - 0.09") Applicable cutting tool Nylon cutting head Nylon cutting head Cutting diameter 350 mm (13-3/4") -
Page 3: Personal Protective Equipment
Personal protective equipment Electrical and battery safety Dress Properly. The clothing worn should be Avoid dangerous environment. Don't use the tool functional and appropriate, i.e. it should be tight- in damp or wet locations or expose it to rain. fitting but not cause hindrance. Do not wear loose Water entering the tool will increase the risk of clothing or jewelry. -
Page 4: Maintenance Instructions
Check damaged parts before further use of the 14. Never drag the tool on the ground when moving tool. A guard or other part that is damaged should from place to place, the tool may become be carefully checked to determine that it will damaged if moved in this manner. - Page 5 FOR BATTERY CARTRIDGE causing fires, personal injury and damage. It will also void the Makita warranty for the Makita tool and charger. Before using battery cartridge, read all Tips for maintaining maximum battery life...
-
Page 6: Parts Description
PARTS DESCRIPTION Lock-off lever Battery cartridge Switch trigger Power lamp Main power button Reverse button Hanger Grip Protector (cutting tool guard) 015789... -
Page 7: Functional Description
The tool will automatically stop during operation if the FUNCTIONAL DESCRIPTION tool or battery is placed under one of the following conditions. In some conditions, the indicators light up. Overload protection WARNING: Always be sure that the tool is switched off •... -
Page 8: Remaining Battery Capacity Indication
Remaining battery capacity indication Indicator lamps Remaining Battery indicator status capacity Remaining battery capacity Lighted Blinking Blinking 75% to 100% 50 % - 100 % 50% to 75% 25% to 50% 20 % - 50 % 0% to 25% 0 % - 20 % Charge the battery. - Page 9 To start the tool, grasp the rear handle (the lock-off lever Once the tool is stopped, the rotation returns to • is released by the grasp) and then pull the switch trigger. regular direction when you start the tool again. To stop the tool, release the switch trigger.
-
Page 10: Operation
Use of a damaged cutting tool could result in serious personal injury. NOTICE: Be sure to use genuine Makita nylon cutting head. • Turn the tool upside down so that you can replace the nylon cutting head easily. - Page 11 To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. 013824 Hook the middle of the new nylon cord to the notch located at the center of the spool between the 2 channels provided for the nylon cord.
-
Page 12: Troubleshooting
Before asking for repairs, first, conduct your own inspection. If you find a problem that is not explained in the manual, do not attempt to dismantle the tool. Instead, ask Makita Authorized or Factory Service Centers, always using Makita replacement parts. Malfunction status... -
Page 13: Optional Accessories
Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Nylon cutting head • Nylon cord (cutting line) • Makita genuine battery and charger •...