Table of Contents
Advertisement
AXIS Q8665-LE PTZ Network Camera
About PTZ (Pan Tilt Zoom)
9. Click Save.
How to edit a guard tour
1. Go to Setup > PTZ > Guard Tour.
2. Select the guard tour in the Guard Tour List.
3. Click Modify.
How to delete a guard tour
1. Go to Setup > PTZ > Guard Tour.
2. Select the guard tour in the Guard Tour List.
3. Click Remove.
Advanced
About driver-specific settings
The Device Settings window displays driver specific settings. The appearance of this window can vary depending on the driver
installed. Options that can be configured include:
•
Driver Specific Settings for Video Source
•
Mechanical Limits for Moving Video Source
•
Light Control Video Source
•
Extended Driver Specific Settings for Video Source
For download and installation information about PTZ drivers for your Axis product please visit www.axis.com/support
Extended Driver Specific Settings
Extended Driver Specific Settings for Video Source 1 allows you to configure the following parameters:
Move Speed - Enter a value from 1–100 and click Save to set the pan/tilt speed.
Nozzle Position - Select Nozzle Position and click Save to save the current PT position as the washing position and to enable the
washer button on the Live View page. For information about how to configure the washer see Configure the Washer on page 31
Washer Configuration - Enter a value (1 or 2) and click Save to select a washer configuration. For more detailed information about
the washer configurations, see Configure the Washer on page 31.
Light sensor box - Select Light sensor box and click Save to enable the external light sensor.
Wiper dwell time - Enter a value from 1–60 (seconds) and click Save to set the duration of the wiper sequence.
Calibrate - Select Calibrate and click Save to reset camera position if the camera orientation has been changed by outer circumstance.
Image Freeze Mode - Select Presets to freeze the video stream while the camera changes preset position. Select All to freeze the
video stream while the camera changes preset position or during manual pan/tilt operation. Select Off to disable image freeze mode.
About advanced PTZ settings
Advanced PTZ settings can be configured under PTZ > Advanced > Controls.
30
Advertisement
Table of Contents
