Axis P5624-E Mk II User Manual page 30

AXIS P5624-E Mk II PTZ Dome Network Camera
PTZ (Pan Tilt Zoom)
Adaptive Near Limit is a feature that increases the near focus limit with the zoom ratio. The minimum value is 1.2 m in wide (1x)
and the highest value is what is specified in the web GUI as near focus limit.
Move speed sets the speed of the camera's pan and tilt movements. The default setting is maximum speed.
When using a joystick (or emulating one with the mouse) the Enable proportional speed setting can be used to reduce the maximum
pan/tilt movement speed, i.e. the speed the camera view moves at when the joystick is pushed all the way out in any direction. This is
useful then the view is zoomed in on an object.
Speed zoom increases the speed when zooming in at the cost of initial image quality during the zoom move. If you enable both speed
zoom and autofocus, the speed zoom kicks in each time you, for example, move into a focus recall area or a preset position where
autofocus is disabled. Conditions when speed zoom doesn't work:
• When autofocus is active
• Outside the optical zoom range
• If an e-flip has been performed, i.e. when the mechanics is in the wrong position
To enable the speed zoom feature, go to Setup > PTZ > Advanced > Limits.
See the online help
Controls
Advanced PTZ settings can be configured under PTZ > Advanced > Controls.
The Panel Shortcut Command Buttons list shows the user-defined buttons that can be accessed from the Live View page's Ctrl
panel. These buttons can be used to provide direct access to commands issued using the VAPIX® application programming interface.
Click Add to add a new shortcut command button.
The following PTZ controls are enabled by default:
• Pan control
• Tilt control
• Zoom control
for more information.
30