BT 1010 User Manual page 63

7916 Hub Phone 1010 [6]
You are then asked to enter the system PIN (0000) and
5.
press OK.
Shows
6.
REGISTERING HANDSET. PLEASE WAIT
You should then get confirmation that the handset is
7.
registered.
The handset will automatically be allocated the next available
handset number which will be displayed when in standby mode.
19/12/06 16:18
Hub Phone 1010 – Edition 2– Issue 5 – 19.12.06 – 7916
Page 63
Using additional handsets
If your handset is already registered to
a base, the
the right of the base number.
If there are already 5 handsets
.
registered to the base you will hear a
double beep.
Each digit of the PIN code will be
displayed as a
Press Clear
incorrect digit.
If you enter the wrong PIN code you
will hear a double beep.
If registration fails, the handset will
return to standby mode and you will
need to repeat the registration
procedure and try a different base
number.
63
symbol will be shown to
*
for security reasons.
*
if you enter an