Initial Camcorder Setup; Installing And Charging The Battery - Vivitar DVR 794SHD User Manual

Initial Camcorder Setup

INSTALLING AND CHARGING THE BATTERY

TO INSTALL THE LITHIUM BATTERY:
1. If the camera is inside the waterproof casing, please take it out of the casing.
2. Push and hold the battery cover lever up to the unlock/open position, until it flips open.
3. Insert the battery into the battery compartment as shown. Make sure to place the battery
according to the correct polarity as shown inside the battery compartment.
4. Close the battery cover.
TO CHARGE THE LITHIUM BATTERY:
1. Power off the camcorder.
2. Connect the included USB cable to the camcorder and connect the other end of the cable
to a power source such as the included AC charger or to a computer.
6