Table of Contents
Advertisement
TROUBLE SHOOTING GUIDE
No Power
Battery power dies shortly after correctly
charging.
Transceiver cannot scan
All band noisy after programmed or green light
always lightens
No sound after using microphone for a while
Communication distance becomes short, and it
is low sensitivity
31
Professional
FM Transceiver
Problem
Corrective Action
A.
The battery pack may be exhausting. Recharge
or replace the battery pack.
B.
The battery pack may not be installed correctly.
Remove the battery pack and install it again.
C.
The power switch is broken; send it to local
dealers to repair.
D.
Battery touch is broken; send it to local dealers
to repair.
The battery pack life is finished. Replace the
battery pack with a new one.
The channels are not in scan list. (Professionals
set it.)
Turn on squelch when programmed. Non-
professionals are advised not to adjust this
function.
Earphone jack is broken. (Please contact with
local dealers to repair it.)
A.
Check whether the antenna is in good condition
and the antenna base do not come adrift.
B.
Users select wrong frequency type which
is not in accord with this transceiver when
programming.
C.
Whether it has set in low power output. (Please
contact with local dealers to repair it.)
Advertisement
Table of Contents
