BACKGROUND OPERATIONS
will automatically exit this function.
Time-out Timer
The purpose of the Time-out Timer is to prevent any caller from using a channel for an extended
period of time. If you continuously transmit for a period of time that exceeds the programmed time
set in advance, the transceiver will stop transmitting with voice prompt.
Users can set TOT timer by programming software.
Time-Out Timer Pre-Alarm
The Time-Out Timer Pre-Alarm is to alarm users that overtime transmission is going to happen.
Users can program desired TOT Pre-Alarm time by programming software.
TOT Re-transmitting Time Setup
TOT Re-transmitting Time is the interval between the stopped overtime transmission and
allowed re-transmission. Pressing PTT key before Re-transmitting time, the transceiver will inhibit
transmission with voice prompt.
Users can set desired TOT Re-transmitting Time by programming software.
VOX Function
When this function is enabled, you can begin transmitting by fitted high voice, no needing to press
25
Professional
FM Transceiver