System - D-Link DSL-G225 User Manual

Section 4 - Configuration
This page allows you to reboot the device, backup your settings, or restore settings either from a file or to their default values.
Reboot:
Click this button to reboot the device.
SYSTEM - BACKUP SETTINGS
Backup Settings: Click this button to save the current router configuration settings to a
file on the hard disk of the computer you are using. You will see a file
dialog, where you can select a location and file name for the settings.
SYSTEM - UPDATE SETTINGS
To restore a saved configuration, use the Browse... button to find the
Update Settings:
previously saved configuration file. Then, click the Update Settings
button to transfer those settings to the device.
RESTORE ROUTER SETTINGS TO THE FACTORY DEFAULTS.
Restore Default
Click this button to restore all configuration settings back to the
Settings: settings that were in effect at the time the device was shipped
from the factory. Any settings that have not been saved will be lost,
including any rules that you have created.
Warning: Do not turn off your device or press the Reset button while
an operation in this page is in progress.
D-Link DSL-G225 Wireless N300 ADSL2+/VDSL2 Modem Router User Manual
SYSTEM - REBOOT

System

92