D-Link DSL-G225 User Manual page 58

Section 4 - Configuration
GUEST/VIRTUAL ACCESS POINT 1-3
Enable Check Enable to create a guest wireless network. This network will be
Wireless separate from your main wireless network.
Guest
Network:
Guest (SSID): Create a name for your wireless network using up to 32 characters.
The SSID is case-sensitive. Choose something for easy identification by
wireless clients.
Visibility Visible networks conveniently advertise their existence to devices
Status: looking for Wi-Fi networks to join. Invisible, or hidden, networks do not.
To join an invisible network users must manually input its SSID.
Note: Making a network Invisible is not a form of security alone.
User Isolation: Off is the default and recommended setting. Turning on user isolation will
prevent wireless clients from communicating with each other. This may be
desired if the DSL-G225 will be used in a public setting.
Disable WMM WMM (Wi-Fi Multimedia) is a QoS (Quality of Service) system for
Advertise: improving the quality of video and voice applications on your wireless
network.
Enable Enable or Disable Wi-Fi Wireless Multicast Forwarding (WMF). The
Wireless transmission quality of video service such as IPTV may be improved with
Multicast this option enabled.
Forwarding
(WMF):
Global 16 is the default and recommended setting. Specify the maximum
Max Clients: number of wireless clients allowed to connect.
Click Apply when you are done.
D-Link DSL-G225 Wireless N300 ADSL2+/VDSL2 Modem Router User Manual 53