Installing the appliance
Fitting a door front which is heavier
than the maximum permitted could
damage the hinges. This can cause
subsequent functional problems.
Before fitting furniture doors, ensure
that the weight of the door does not
exceed the maximum permitted:
Appliance
KFN 37432 iD,
KFNS 37432 iD
When fitting large or divided furniture
doors an extra fitting kit or set of fixing
brackets should be used. These are
available to order from Miele.
88
Upper
Lower
door in
door in
kg
kg
17
12
Carry out the following steps on both
doors.
A gap of 8 mm is set ex-works
between the appliance door and the
fixing bracket. Double check this gap
and reset it if necessary.
Push fitting aids up to the height of
the furniture door: the lower edge X
of the fitting aids must be at the same
height as the upper edge of the
furniture door being fitted (see on
the diagram).