Miele KFN 37432 iD Operating And Installation Instructions page 59

The interior lighting is not working.
Problem
The interior lighting is
not working.
Cause and remedy
The appliance has not been switched on.
 Switch the appliance on.
Sabbath mode is switched on: the display is dark
and the appliance is cooling.
 Touch the settings sensor to leave Sabbath mode.
The temperature will then appear in the display and
the interior lighting will come on (see "Selecting
further settings - Switching Sabbath mode on/off").
To avoid overheating, the lighting switches itself off
automatically after approx. 15 minutes if the door is
left open. If this is not the case, then there is a fault.

Danger of electric shock.
There are live electrical components under the
lighting cover.
The LED lighting may only be repaired or replaced
by a Miele authorised service technician.

Danger of injury from LED lighting. Light
intensity corresponds to laser beam class 1/1M.
The lighting covers must not be removed or
damaged, or be removed due to damage. This
could cause injury to your eyes.
Do not look into the LED lighting (laser beam class
1/1M) with optical instruments (e.g. magnifying
glass or similar).
 Call the Miele Service Department.
Problem solving guide
59