Miele KFN 37432 iD Operating And Installation Instructions page 58

Problem solving guide
Message
The mains connection
symbol , appears
and the alarm sounds.
The temperature display
will also show the
warmest temperature
recorded in the freezer
during an interruption to
the power supply or a
power cut.
"F0 to F9" appears in
the display.
"FE*" appears in the
display.
The  symbol lights up
in the display, the
appliance does not get
cold, although the
controls and the interior
lighting are working.
58
Cause and remedy
The temperature in the appliance in the previous days
or hours has risen too high because of a power cut or
interruption to the power supply.
The appliance will go back to the last temperature
setting when the power is back on.
 Touch the alarm off sensor.
The warmest temperature display will go out. The
display will then revert to showing the current
temperature in the freezer.
 Depending on the temperature displayed, you
should check the condition of food in the freezer. If
it has defrosted or started to defrost, check that it
is still safe to use and, if so, use it as soon as
possible. Defrosted food may only be re-frozen
after it has been cooked.
There is a fault.
 Call the Miele Service Department.
There is a fault.
 Call the Miele Service Department.
Demo mode is switched on. This allows the appliance
to be presented in the showroom without the cooling
system being switched on. Do not activate this setting
for domestic use.
 Switch off Demo mode (see "Information for
dealers - Demo mode").