Toro 38640 Operator's Manual page 21

Figure 58
3. Remove the bulb straight out from the back of the
headlight (Figure 59).
Figure 59
4. Insert a new bulb into the back of the headlight (Figure
60).
Figure 60
5. Turn the base of the bulb clockwise until it is snug
(Figure 61).
Figure 61
6. Insert the wire connector straight into the back of the
headlight until it is securely in place (Figure 62).
G001033
G001034
G001035
G001036
21
1
G000992
Figure 62
3
2