Vibration Level; Safety And Instruction Decals - Toro 30826 Operator's Manual

Vibration Level

This unit does not exceed a vibration level of 2.5 m/s
the hands based on measurements of identical machines per
ISO 5349 procedures.

Safety and Instruction Decals

Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or lost.
94-3353
1. Crushing hazard of fingers and hands—keep hands away.
99-3558 (for CE)
1. Warning—read the operator's manual.
2. To start the engine, sit on the seat and rotate the ignition key to
On/Preheat until the glow plug indicator light goes out. Rotate
the key to start and disengage the parking brake. Read the
operator's manual for further instructions.
3. To stop the engine, disengage the cutting units, rotate the
ignition key to Off, and remove the key. Engage the parking
brake. Read the operator's manual for further instructions.
This unit does not exceed a vibration level of 0.5 m/s
the posterior based on measurements of identical machines
per ISO 2631 procedures.
2
at
1. Explosion hazard—wear
eye protection.
2. Caustic liquid
hazard—flush with water
and get medical help fast.
1. Warning—read the operator's manual for blade torque
instructions.
7
2
100-4837
93-7276
3. Fire hazard—fire, open
light, and smoking
prohibited.
4. Toxic hazard—keep
children away from the
battery.
93-7818
at