Installation & Connection; Installation (Qnd-6010R/6020R/6030R) - Samsung QND-6010R User Manual

Table of Contents

Advertisement

installation & connection

inStaLLation (QnD-6010r/6020r/6030r)

precautions before installation
Ensure you read out the following instructions before installing the camera:
• It must be installed on the area (ceiling or wall) that can withstand 5 times the weight of the camera
including the installation bracket.
• Stuck-in or peeled-off cables can cause damage to the product or a fire.
• For safety purposes, keep anyone else away from the installation site.
And put aside personal belongings from the site, just in case.
Disassembling
1. Use one hand to hold the camera's bottom part and turn the cover
counterclockwise with another hand to separate it.
2. Lift up the inner cover to separate it.
installation
1. Attach the installation template to the selected area and punch 3
holes as shown in the figure.
2. Using 2 tapping screws provided, fix the camera at 2 holes drilled
with a template.
Set the <
`
monitoring.
3. Connect the camera internal terminal with the corresponding
Dome Cover
cable.
4. Adjust the lens in a desired direction by referring to the "adjusting
the monitoring direction for the camera" section. (page 17)
We recommend you not to touch the lens as the camera lens has been
`
J
properly focused in the final process of manufacturing. If so, the lens may be
out of focus or stained by alien substances.
5. Please connect the inner cover to the main body.
6. While grabbing the bottom side of the camera with your hand, please
grab and push its cover with the other hand to align the two arrow signs,
as shown in the figure.
To assemble the dome cover, make the arrows match each other and press the
`
J
cover firmly.
If the dome cover is rotated during assembly or is assembled incorrectly, diffused
reflection may occur or the lens section may rotate, which will cause the shooting
range to be changed.
Make sure that the dome cover is correctly connected to the bottom part as shown
`
in the figure.
If the snap-fit is not connected correctly, the dome cover may fall, which may cause
injury.
> mark imprinted on the camera to face the direction of camera
English _13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Qnd-6020rQnd-6030rQno-6020rQno-6030rQno-6010rQnv-6030r

Table of Contents