At A Glance (Qno-6020R/6030R) - Samsung QND-6010R User Manual

overview

at a GLance (Qno-6020r/6030r)

appearance
a b
Item
Micro SD card slot
(Internal space of the product) This is a slot in which you can insert a Micro SD card.
a
The button restores all camera settings to the factory default.
Press and hold for about 5 seconds to reboot the system.
If you reset the camera, the network settings will be adjusted so that DHCP can be
Reset Button
J
b
enabled. If there is no DHCP server in the network, you must run the IP Installer
program to change the basic network settings such as IP address, Subnet mask,
Gateway, etc., before you can connect to the network.
Sunshield Hold
It fixes the sunshield with the camera.
c
Sunshield
It protects the camera from the direct sunlight.
d
10_ overview
c
d
Description
components
a
b
c
d
Item
Power Port
Used to plug the power cable.
a
ARM-OUT
Alarm I/O Port
GND
b
ARM-IN
Network Port
Used to connect the PoE or Ethernet cable for network connection.
c
Audio In Jack
Used to connect to a microphone.
d
CAUTION:
Be ware of the
Rated Voltage and Polarity
of the power connection.
Description
Used to connect the alarm output signal.
These are common ports to connect alarm input/output signals.
Used to connect the alarm input sensor or external day/night sensor.