Network Connection And; Connecting The Camera Directly To Local Area Networking; Connecting The Camera Directly To A Dhcp Based Dsl/Cable Modem; Connecting The Camera Directly To A - Samsung QND-6010R User Manual

Table of Contents

Advertisement

network connection and setup
You can set up the network settings according to your network configurations.

connectinG tHe camera DirectLy to LocaL area networKinG

connecting to the camera from a local pc in the Lan
1. Launch an Internet browser on the local PC.
2. Enter the IP address of the camera in the address bar of the browser.
Camera
Camera
Local PC
<Local network>
A remote PC in an external Internet out of the LAN network may not be able to connect to the camera installed in the intranet
`
M
if the port-forwarding is not properly set or a firewall is set.
In this case, to resolve the problem, contact your network administrator.
In the IP installer, you can use the initial password, "4321" to set IP Address, Subnet Mask, Gateway, HTTP Port, VNP Port, IP
`
type. After changing the network interface, for better security, access the web viewer and change the password.
By factory default, the IP address will be assigned from the DHCP server automatically.
`
If there is no DHCP server available, the IP address will be set to 192.168.1.100.
To change the IP address, use the IP Installer.
For further details on IP Installer use, refer to "Static IP Setup". (Page 25)
INTERNET
External Remote PC
DDNS Server
(Data Center, KOREA)
connectinG tHe camera DirectLy to a DHcp BaSeD DSL/caBLe
moDem
DSL/Cable Modem
Camera
1. Connect the user PC directly with the network camera.
2. Run the IP Installer and change the IP address of the camera so that you can use the web browser on
your desktop to connect to the Internet.
3. Use the Internet browser to connect to the web viewer.
4. Move to [Setup] page.
5. Move to [network] – [DDnS] and configure the DDNS settings.
6. Move to [Basic] – [ip & port], and set the IP type to [DHcp].
7. Connect the camera, which was removed from your PC, directly to the modem.
8. Restart the camera.
For configuring the DDNS settings, refer to "DDNS". (page 48)
`
M
For registering the DDNS settings, refer to "Registering with DDNS". (page 48)
`
Refer to "IP & Port" for how to setup IP. (page 42)
`
INTERNET
External Remote PC
DDNS Server
(Data Center, KOREA)
English _23

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Qnd-6020rQnd-6030rQno-6020rQno-6030rQno-6010rQnv-6030r

Table of Contents