System Setup - Samsung QND-6010R User Manual

setup screen

SyStem Setup

product information
1. From the Setup menu, select the <System (
2. Click <product information>.
3. Check the camera information, or provide details according
to your network environment.
• Model : Model name of the product.
• Serial number : Product serial number.
• Device name : Provide a device name that will be displayed on the Live screen.
• Location : Specify the location where the camera is installed.
• Description : Provide detailed information about the camera location.
• Memo : Provide an explanation about the camera for better understanding.
• Language : Select a preferred language for the Web Viewer OSD.
The default language is set to <English>.
`
M
4. When done, click [apply ( )].
upgrade / reboot
1. From the Setup menu, select the <System (
2. Click <upgrade / reboot>.
3. Select a desired item and set it appropriately.
• Upgrade : Performs upgrading the system.
• Factory default : Initializes all setting information including
the camera settings to the factory reset state. (however,
logs are not initialized)
- Exclude Setting : If you select the <network> check box,
network settings are not initialized.
The IP addressing system will be defaulted to DHCP if you reset the camera. If no DHCP server is found, the previous settings
`
will be restored automatically.
• Configuration backup & Restore : Backs up the current system settings before performing the
restoration process. The system is automatically restarts after backup or restoration.
• Restart : Restarts the system.
58_ setup screen
)> tab.
)> tab.
to perform the upgrade
1. Click [Browse] and specify a file to upgrade.
2. Click [upgrade].
3. An "upgrade" progress bar is prompted to show the upgrading status.
4. Once completed upgrading, the browser exits and the camera restarts.
It may take a max of 10 minutes for the upgrade process.
`
M
If you forcibly terminate the upgrade process, upgrade will not be completed properly.
During restarting the system, accessing with web viewer will not be made.
`
You can download the latest version from the Hanwha Techwin web site.
`
to back up the current settings
1. Click [Backup].
2. A file in a ".bin" file format is saved in "Library" -> "Document" -> " Downloads".
to restore the backup settings
1. To restore the backup settings, click [restore].
2. Select a desired backup file.
If you perform the backup or restoration, the web browser will be closed and the camera will reboots.
`
M
If you try to recover the config file backed up in other model, some functions may malfunction and you need to change the
`
setting manually.