Table of Contents
Advertisement
installation & connection
Installation
1.
Use the provided screws (x3) to fix the bracket to a desired position (ceiling or wall).
Ensure that the <CAMERA FRONT> label on the bracket faces the direction for camera monitoring.
2.
Arrange the cables through the bracket to
the ceiling or wall.
If you drill a hole in the ceiling cover for wiring, press
hard to remove the cover and attach the dust-proof
plate to it, and arrange the cables through the plate.
If you intend to arrange the cables without drilling a
hole, use the empty area opposite to the <CAMERA
FRONT> label side for the wiring purpose.
3.
Mount the camera body onto the bracket.
Align the marking hole of the camera body
with the <CAMERA FRONT> label of the
bracket, and turn the body in the <LOCK>
direction.
4.
Refer to "Adjusting the monitoring direction
for the camera" to adjust the lens in a desired
direction.
5.
Close the top cover.
Fit the top cover into the fixing tips of the camera
body and turn the cover clockwise.
16_ installation & connection
Wiring Cover
Advertisement
Table of Contents
