Digital Radio - Kenwood KDC-X7000DAB Instruction Manual

DIGITAL RADIO

About DAB (Digital Audio Broadcasting)
DAB is one of the digital radio broadcasting systems
available today. It can deliver digital quality sound
without any annoying interference or signal distortion.
Furthermore, it can carry text, pictures and data.
In contrast to FM broadcast, where each program is
transmitted on its own frequency, DAB combines several
programs (called "services") to form one "ensemble."
The "primary component" (main radio station) is
sometimes accompanied by a "secondary component"
which can contain extra programs or other information.
Preparation:
1
Connect the supplied DAB antenna to the DAB
antenna jack. ( 32)
2 Press repeatedly to select DIGITAL AUDIO.
3 Press and hold (LIST UPDATE) to start the
Service List update.
"LIST UPDATE" appears and update starts. "UPDATED"
appears when update completes.
Updates take up to 3 minutes. No interruption (such as
traffic information) is possible during updates.
• To cancel the Service List update:
Press and hold (LIST UPDATE) again.
6
Search for an ensemble
1 Press repeatedly to select DIGITAL AUDIO.
2 Press repeatedly (or press
Press and hold S / T (or press and hold S /
3
an ensemble.
Press S / T (or press S /
4
or component to listen.
• To change the searching method for S / T: Press
: Press S / T: Select an ensemble, service or component.
AUTO1
Press and hold S / T: Automatically search for an ensemble.
: Press S / T: Search for a preset station.
AUTO2
MANUAL : Press S / T: Select an ensemble, service or component.
Press and hold S / T: Manually search for an ensemble.
• To store a service: Press and hold one of the number buttons (1 to 6).
• To select a stored service: Press one of the number buttons (1 to 6) (or press one of
the number buttons (1 to 6) on RC-406).
Select a service
1
Press (LIST UPDATE) to enter Service Search mode.
2 Turn the volume knob or press J / K to select a service, then press the knob.
(or using RC-406)
Press J / K to search for a service, then press
To cancel the Service Search mode, press
on RC-406) to select DB1/ DB2/ DB3.
on RC-406) to search for
on RC-406) to select an ensemble, service
repeatedly.
.
(LIST UPDATE).