Digital Radio; Digital Radio Basic Operation - Kenwood DMX9720XS Instruction Manual

Digital Radio

Digital Radio

Digital Radio Basic Operation

Most functions can be controlled from the
source control screen.
To enter Digital Radio source, touch [Digital
Radio] icon in the source selection screen.
(P.13)
NOTE
• Set the remote control mode switch to AUD
mode before starting operation, see Switch the
operation mode (P.72).
Control screen
1
2
3
4
5
Open the drawer
7
3
8
3
Indicator display
1
Displays the received signal strength.
Operation keys
2
• [1] : Displays the Service List screen. For details
on search operation, see Service search
(P.34).
32
(DMX9720XDS)
• [E] [F] : Tunes in a ensemble, service, and
• [
Touch the left side of the screen to display the
function panel. Touch again to close the panel.
• [TI]: Selects the traffic information mode. For
• [SETUP]: Displays the Digital Radio SETUP
• [PTY]: Searches for a program by program
• [DLS]: Display the Dynamic Label Segment
6
P#: Preset number
CH#: Channel display
Touch to switch seek modes in the following
sequence: [AUTO1], [AUTO2], [MANUAL].
• [AUTO1]: Tunes in a ensemble with good
6 • [AUTO2]: Tunes in the memorized ensemble
• [MANUAL]: Switches to the next ensemble
9
• Touching [ ]/[ ] allows you to change the
6
• Recalls the memorized service.
• When touched for 2 seconds, stores the
The picture data is displayed if available from
current content.
component. The seek mode switching can be
changed. (see Seek mode).
5
] : Touch to mute or not to mute.
Function panel
3
details, see Traffic Information (P.34).
screen. For details, see Digital Radio SETUP
(P.35).
type. For details, see Search by program type
(P.33).
screen.
Indicator display
4
Seek mode
5
reception automatically.
one after another.
manually.
Preset list
6
display size.
currently being received service in the
memory.
Artwork area
7