Download Print this page
Makita 9047 Manual

Makita 9047 Manual

Hide thumbs Also See for 9047:

Advertisement

Quick Links

180 mm (7") MODEL 9047/9047S 9047F/9047SF
180 mm (7") MODEL 9057/9057S 9057F/9057SF
230 mm (9") MODEL 9049/9049S 9049F/9049SF
230 mm (9") MODEL 9059/9059S 9059F/9059SF
SPECIFICATIONS
Model
Depressed center wheel diameter ............. 180 mm (7")
-1
No load speed (min
) ................................ 8,500
Overall length............................................. 470 mm
Net weight ................................................. 4.8 kg
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
Power supply
The tool should be connected only to a power supply of the same voltage as indicated on the nameplate, and can only
be operated on single-phase AC supply. They are double-insulated in accordance with European Standard and can,
therefore, also be used from sockets without earth wire.
Angle Grinder
9047/9047S
9057/9057S
9047F/9047SF 9057F/9057SF 9049F/9049SF 9059F/9059SF
180 mm (7")
8,500
470 mm
(18-1/2")
(18-1/2")
5.1 kg
(10.5 lbs)
(11.2 lbs)
DOUBLE
INSULATION
9049/9049S
9059/9059S
230 mm (9")
230 mm (9")
6,600
6,600
470 mm
470 mm
(18-1/2")
(18-1/2")
4.8 kg
5.1 kg
(10.5 lbs)
(11.2 lbs)

Advertisement

loading

Summary of Contents for Makita 9047

  • Page 1 Angle Grinder 180 mm (7”) MODEL 9047/9047S 9047F/9047SF 180 mm (7”) MODEL 9057/9057S 9057F/9057SF 230 mm (9”) MODEL 9049/9049S 9049F/9049SF 230 mm (9”) MODEL 9059/9059S 9059F/9059SF DOUBLE INSULATION SPECIFICATIONS Model 9047/9047S 9057/9057S 9049/9049S 9059/9059S 9047F/9047SF 9057F/9057SF 9049F/9049SF 9059F/9059SF Depressed center wheel diameter ..... 180 mm (7”) 180 mm (7”)
  • Page 2 For Cut-off Wheel ø45 ø78 ø Australia New Zealand...
  • Page 3 Symbols The following show the symbols used for the tool. Be sure that you understand their meaning before use. J Read instruction manual. J DOUBLE INSULATION...
  • Page 4: Safety Instructions

    ENGLISH Explanation of general view Wheel guard Outer flange 78 16 Lock lever Screw 10 Cut-off wheel 17 Carbon brush Notch 11 Inner flange 78 18 Insulation tip Side grip 12 Dust collecting wheel guard 19 Commutator Lock nut (optional accessory) 20 Brush holder cap Depressed center wheel 13 Lock nut wrench...
  • Page 5: Additional Safety Rules

    21. Warning. 18. Watch out for flying sparks. Hold the tool so that sparks fly away from you and other persons or The use of any accessory or attachment, other flammable materials. than those recommended in this instruction man- 19. Pay attention that the wheel continues to rotate ual or the catalog, may present a risk of personal after the tool is switched off.
  • Page 6: Maintenance

    Release the trigger to stop. To maintain product safety and reliability, repairs, mainte- For Germany, Austria, Italy, Netherlands, Belgium, nance or adjustment should be carried out by a Makita Spain, Portugal, Denmark, Sweden, Norway, Finland Authorized Service Center.
  • Page 7 ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner.
  • Page 8 • Dust collecting wheel guard Makita Corporation Anjo, Aichi, Japan Made in Japan 884062C4...