Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Makita XAG01
Summary of Contents for Makita XAG01
- Page 1 INSTRUCTION MANUAL Cordless Angle Grinder XAG01 007214...
-
Page 2: Specifications
ENGLISH (Original instructions) SPECIFICATIONS Model XAG01 Wheel diameter 115mm (4-1/2") Spindle thread 5/8" No load speed (RPM) 10,000 /min Overall length 317 mm (12-1/2") Net weight 2.0 kg (4.4 lbs) 2.3 kg (5.0 lbs) Rated voltage D.C. 18 V Standard battery cartridge... -
Page 3: Specific Safety Rules
15. Dress properly. Do not wear loose clothing or coins, keys, nails, screws or other small metal jewellery. Keep your hair, clothing, and gloves objects, that can make a connection from one terminal to another. Shorting the battery away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. - Page 4 ENC007-8 NEVER use tool with wood cutting blades or other sawblades. Such blades when used on a IMPORTANT SAFETY grinder frequently kick and cause loss of INSTRUCTIONS control leading to personal injury. 10. Hold the tool firmly. FOR BATTERY CARTRIDGE Keep hands away from rotating parts.
-
Page 5: Functional Description
In this situation, turn the tool off and stop the FUNCTIONAL DESCRIPTION application that caused the tool to become overloaded. Then turn the tool on to restart. If the tool does not start, the battery is CAUTION: overheated. In this situation, let the battery Always be sure that the tool is switched off and the •... - Page 6 − Battery cartridge replacing signal ASSEMBLY − When the remaining battery capacity is low, the indicator lamp lights up during operation earlier than that of high battery capacity. CAUTION: − Accidental re-start preventive function Always be sure that the tool is switched off and the •...
- Page 7 Installing or removing depressed center 1. Lock nut grinding wheel/Multi-disc 2. Diamond wheel 3. Inner flange 1. Lock nut 4. Spindle 7/8" 2. Depressed center grinding wheel/Multi-disc 3. Inner flange 011576 Installing or removing flex wheel (optional accessory) 007219 WARNING: 1.
-
Page 8: Operation
Operation with diamond wheel OPERATION (optional accessory) WARNING: CAUTION: It should never be necessary to force the tool. The Do not "jam" the wheel or apply excessive • • weight of the tool applies adequate pressure. pressure. Do not attempt to make an excessive Forcing and excessive pressure could cause depth of cut. -
Page 9: Maintenance
Do not start the cutting operation in the workpiece. • Operation with wire wheel brush Let the wheel reach full speed and carefully enter (optional accessory) into the cut moving the tool forward over the workpiece surface. The wheel may bind, walk up 1. -
Page 10: Optional Accessories
A cut-off wheel can also be used with an optional guard. If you decide to use your Makita grinder with approved accessories which you purchase from your Makita distributor or factory service... - Page 11 Grip 36 Wheel gurad Inner flange 45 4-1/2" Depressed center grinding wheel/4-1/2" Multi-disc Lock nut 5/8-45 Rubber pad 100 Abrasive disc Sanding lock nut 5/8-48 Wire wheel brush Wire cup brush Wheel guard (For cut-off wheel) Cut-off wheel / 4-1/2"Diamond wheel Lock nut wrench 28 014077 NOTE:...