BenQ W1050 User Manual page 51

FUNCTION
Picture Mode
User Mode
Management
Brightness
Contrast
Color
Tint
Sharpness
Color
Temperature
Lamp Power
Advanced...
Reset Current
Picture Mode
DESCRIPTION
Pre-defined picture modes are provided so you can optimize your
projector image set-up to suit your program type. See
a picture mode" on page 33
Selects a picture mode that best suits your need for the image
quality and further fine-tune the image based on the selections
listed on the same page below. See
mode" on page 33 for details.
This function is only available when User 1 or User 2 is
selected.
Adjusts the brightness of the image. See
on page 35 for details.
Adjusts the degree of difference between dark and light in the
image. See"Adjusting Contrast" on page 35
Adjusts the color saturation level -- the amount of each color in a
video image. See "Adjusting Color" on page 35
Adjusts the red and green color tones of the image. See
"Adjusting Tint" on page 35
Adjusts the image to make it look sharper or softer. See
"Adjusting Sharpness" on page 35
See "Selecting a Color Temperature" on page 36
See "Setting Lamp Power" on page 61
Black Level
See "Setting Black Level" on page 36
Gamma Selection
See "Selecting a Gamma Selection" on page 36
Brilliant Color
See "Adjusting Brilliant Color" on page 36
Color Temperature Fine Tuning
See "Setting a preferred color temperature" on page 37
Color Management
See "Color Management" on page 37
Noise Reduction
See "Reducing Noise Reduction" on page 38
Film Mode
See "Selecting a Film Mode" on page 38
See "Resetting current picture mode" on page 34
for details.
"Setting the User 1/User 2
"Adjusting Brightness"
for details.
for details.
for details.
for details.
for details.
for details.
for details.
for details.
for details.
for details.
"Selecting
for details.
for details.
for details.
for details.
Operation 51