BenQ W1050 User Manual page 38

Hide thumbs Also See for W1050:
Table of Contents

Advertisement

4.
Press
to select its range. Increase in the range
will include colors consisted of more
proportions of its two adjacent colors.
Please refer to the illustration to the right
for how the colors relate to each other.
For example, if you select Red and set its
range at 0, only pure red in the projected
picture will be selected. Increasing its
range will include red close to yellow and
red close to magenta.
5.
Press
values to your preference by pressing
color you select will be affected. Every adjusent made will reflect to the image
immediately.
6.
Press
/
For example, if you select Red and set its value at 0, only the saturation of pure
red will be affected.
Saturation is the amount of that color in a video picture. Lower settings
produce less saturated colors; a setting of "0" removes that color from the
image entirely. If the saturation is too high, that color will be overpowering
and unrealistic.
7.
Repeat steps 3 to 6 for other color adjusents.
8.
Make sure you have made all of the desired adjusents.
9.
Press MENU on the projector or remote control to exit and save the settings.
Reducing Noise Reduction
Reduces electrical image noise caused by different media players. The higher the
setting, the less the noise.
Select Noise Reduction
press
/
Selecting a Film Mode
Select Film Mode in the Advanced menu > Picture > Advanced... menu and select
by pressing
On is the default and recommended selection for this projector. When Off is selected, the
Film Mode function is not available.
You can also adjust Gamma Selection, Color
Temperature or Color Management by using
GAMMA, COLOR TEMP or COLOR MANAGE keys
on the remote control
Operation
38
to select Hue and press
to select Gain and adjust its
to select Saturation and adjust its values to your preference by pressing
. Every adjusent made will reflect to the image immediately.
in the Advanced menu > Picture > Advanced... menu
to adjust the value from 0 to 31.
/
on the projector or remote control.
/
RED
Magenta
/
. The contrast level of the primary
Yellow
GREEN
Cyan
BLUE
and

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

W1050sHt1070a

Table of Contents